EPDM Is a short form of Ethylene Propylene Diene Monomer. It is a type of flat roof, precisely, an arm of the single-ply membrane. Alongside other rubber membranes like PVC, TPO, etc., if you like the beauty of an EPDM roof and what to install in yours, we suggest you get to know all about it first. Below is a brief description on the cons and pros of EPDM.
EPDM is less expensive compared to other flat roofing. It is also easy and less expensive to install when you use the ballistic method. Its maintenance cost is not expensive either.
Flame and fire-resistant
EPDM, just like PVC, is fire resistant. That is, it has a class A fire rating. It resists any form of fire from starting, and even if the fire breaks out, it slows the progress so the fire can't move fast.
This will help and allow fire extinguishers to stop the fire before much damages are done to the building.
EPDM can adapt to any environment. It usually comes in black colors, but it has white colors, although black is more common.
It reflects heat, makes your building cooler, and cuts energy costs. This saves you money for other important things. EPDM is lightweight to be used on any building regardless of the size, style, shape, etc.
Aside from PVC, EPDM has one of the longest lifespans, ranging from 15 - 25 years. And at times, even up to 30 years.
Although before the end of its lifespan, you might need to do some repairs. But if properly taken care of and other protective parts are added to it, you might have little or no repairs.
Although EPDM also comes in white colors, it cannot be compared with its rivals when it comes to aesthetics.
You might find more roofing appealing to the eye than EPDM roofing
While EPDM is good and long-lasting, it is also prone to damage, especially when faced with severe weather conditions like the scorching sun, heavy rains, etc.
That's why it's important to seal and waterproof your EPDM. Failure to do this causes overexposure, which leads to damages.
While EPDM has a cost advantage, it also has a disadvantage. As said earlier, the installation of EPDM is lesser when the ballistic installation system is applied. But if the mechanical system or the fully adhered system is applied, the installation cost becomes more expensive. Using this method makes the installation cost more expensive than its rival, TPO.
These are the main advantages and disadvantages of EPDM flat roofing. If you are still not clear on choosing EPDM, you can contact the local roofer in your area for more information. Or contact us at Bushwick Roofing; we will take your questions and guide you on a successful EPDM installation. Contact us at 519 Knickerbocker Ave,
Brooklyn, NY 11221 Info@NYCRenovators.com 718-285-7841
Although it may require more frequent repairs and maintenance, flat roofing is still the number roofing style of choice for homeowners and property managers in New York. Of course, there are many flat roofing materials out there, so how can you decide which is best for your commercial building?
TPO roofing membrane and EPDM membrane, these types of single-ply roofing membrane are currently the top flat roofing materials of choice by many New Yorkers. While the two are a great choice, each has its unique strengths and weaknesses. That means, for you to select the best option for your building, you need to know the pros and cons associated with each of these flat roofing materials. It will also be vital to know how much you can expect to spend on each of them.
Single-layer membrane or single-ply membrane is one of the advanced areas in roofing technology. They are basically sheets of rubber, plastics, and several other synthetics, ballasted or chemically adhered or fastened to an insulating layer of a building. They are also called plastomeric or elastomeric roofing membrane roofs and come in different types, including
With all these types, Ethylene Propylene Diene Monomer (EPDM) and Thermoplastic Polyolefin (TPO) are the most sought-after flat roofing materials by many homeowners and property managers in NY. But of course, you have to go one. So, what is the best type of flat roofing material for your NY home?
Generally, it will cost you about $3 to $14 per square foot in materials and labor to install a typical single-ply membrane commercial roofing system. However, most residential and commercial flat roofing contractors may charge less.
The TPO roofing system will cost about $3 to $7 per square foot, both in material and labor, to have a professional roofer install a TPO roof for you.
EPDM roofing membrane is the oldest and decisively the cheapest single-ply flat roofing material. It will cost about $2 to $5 per square foot to install an EPDM roofing system.
However, the price of installing your TPO roofing system or EPDM roofing system can be affected by several factors, including,
With all of these pros and cons, it should be easier for you to come up with the flat roofing material that best serves your interest. If you’re still confused, you can reach out to a professional flat roofer near you for advice. For more information or questions about flat roofing, contact Bushwick Roofing, 519 Knickerbocker Ave, Brooklyn, NY 11221 718-285-7841, https://www.bushwickroofingny.com/.
Flat roofs are the number one roof of choice for many residential homeowners and commercial property managers. While they have many positives, they also have their flaws.
However, most of the problems you could encounter with your flat roofing system can easily be avoided if you employ the services of a professional flat roofer near you during the roof installation. Also, using a top-notch material and proper flat roof maintenance culture is necessary. But at times, it can still affect your roof regardless of the roofing material, contractor, or even maintenance.
Pounding or pooling occurs when standing water (or stagnant water) has been on your roof for over 48 hours or more. Other reasons are,
This is a situation where the air is trapped between the layers of your roof. Blistering is not a big problem like ponding water but can become one when it receives continuous sun, and you ignore it.
Check out where the blistering occurred and cut out a new roof membrane material, preferably a bit longer and wider. Carefully remove the blistered part from the roof, attach the new membrane to it, and seal it with your preferred adhesive method.
Alligatoring occurs when the coating of your roof cracks and is no more in good shape. It's called alligatoring because the shape it forms after the cracking resembles an alligator's hide.
As you use your roof, there will be degradation like roof flakes, break down, and some of the problems we discussed above.
Do thorough regular inspection on your roof, preferably monthly or quarterly. The goal is to fix any roof problem and make sure your roof is in good condition.
Roof flashing is small metals that are used to connect two roof surfaces. They also act as a link, connecting one roof surface with another. It also helps and prevents water from entering your roof. It wards off water from the chimneys, walls, and valleys of your roof.
No doubt, because of its great importance, every commercial and residential building should have a flashing. But as important as it is, it also has a demerit. It can get damaged in extreme weather conditions like heavy rain, continuous snow or ice, etc.
The best solution is to either repair the damaged flashing or replace it with a new one. And then fix the flashing appropriately.
Holes, tears, and leaking can be caused by:
Even with flat roofs, it's not advisable to climb your roof and conduct roof inspection and repairs. Doing that will not only place your roofing system at risk, but you'd be putting yourself at risk as well. Although you can fix some flat roofing problems alone, most times, it's best to leave the issues to a professional flat roofer. Tackling some flat roofing problems requires experience.
For long-lasting and satisfying flat roofing solutions, reach out to us at 519 Knickerbocker Ave, Brooklyn, NY 11221 718-285-7841, https://www.bushwickroofingny.com/.